Stone Carpet Walkway & Entry-Step Resurfacing

A ½-inch layer of washed river pebbles mixed with UV-stable epoxy and hand-trowelled directly over your existing concrete walk or porch steps—no demolition required.

Yes. Cracks, spalls and uneven joints are ground flush and then buried beneath a seamless pebble layer, removing the catch-edge that causes most sidewalk trips.

No—rounded pebbles create natural texture, and the porous matrix lets water drain through instead of puddling, giving the deck a high wet-traction rating.

Absolutely. The same epoxy-stone mix is applied to stair treads and risers for a continuous look and safer footing on entry steps.

Most front walks (100-150 sq ft) are completed in one day. You can walk on the surface after ~6 hours. Longer runs or tall stair sets may add a second day.

Not if maintained. A clear “reglaze” every 2–3 years re-bonds the surface and keeps stones tight. Skipping reglaze is the main cause of loose pebbles.

Just broom or hose. For stubborn dirt use a mild, non-acid degreaser; high-pressure washers are safe below 1 500 psi.

No. The overlay is seamless—no sand joints for weeds or insects to invade.

Fourteen signature blends plus 1 000+ custom mixes. Homeowners often pick a grey-granite blend to match stone façades or a warm sandstone to complement stucco.

Stones are naturally colour-fast, and the binder is UV-stable; only a fresh clear coat is needed every few years to revive gloss.

The epoxy-stone layer supports more than 6 000 lb / sq ft—plenty for dollies, trash carts and large ceramic planters.

A 3-year limited warranty covers adhesion failure and cracking not caused by slab movement. Damage from abuse, harsh chemicals or skipped reglaze is excluded.